Please ensure Javascript is enabled for purposes of website accessibilitySkip Navigation

Types of Underlayment: Match the Right Layer to Every Floor

 

Key Takeaways

 

Any great floor starts with what's underneath. Underlayment is the layer between your subfloor and your new flooring, and getting it right means a quieter, more comfortable floor that holds up for years.

Our flooring team knows which underlayment works with which floor, and we’re ready to help you get it and get going. This guide breaks down what underlayment does, the main types, and the best match for laminate, hardwood, vinyl plank, and carpet. Read on and get it done right the first time.

 

What Is Underlayment, and How Is It Different From a Subfloor?

The right underlayment smooths out small flaws, cuts down on noise, adds comfort underfoot, and helps block moisture.

What Does Underlayment Do?

A good underlayment does four things:

Not every underlayment does all four, so it pays off to pick the right one for your floor.

 

Pick Your Material: Foam, Felt, Cork, or Rubber

Every underlayment has a job it does best. Here’s the full lineup, so you can pick the right one and get to work. Selection can vary, so check with your local team to see what we carry near you.

Foam Underlayment

Foam underlayment is usually made from polyethylene foam. It's light, easy to cut, and a go-to for floating floors like laminate and click-lock vinyl. Many foam rolls come with a built-in moisture film.

Felt Underlayment

Felt underlayment is made from dense synthetic fiber. It adds cushion and helps dampen sound. It fits well in rooms where you want a solid, quiet feel underfoot, like bedrooms and living areas.

Cork Underlayment

Cork is a natural material with strong sound reduction and a bit of built-in insulation. It works well in apartments, upper floors, and any room where quiet matters.

Rubber Underlayment

Rubber underlayment is dense and durable. It stands up to heavy furniture and busy foot traffic, and it does a strong job on impact sound. It's a smart match for basements, gyms, and rooms that see a lot of action.

Combination Underlayment

Combination underlayment pairs cushion with a built-in vapor barrier, so you get both layers in a single roll. That makes it a great fit for concrete subfloors, where moisture can rise up from below.

 

Lock In the Right Underlayment for Laminate

Laminate is a floating floor, which means it rests on top of the subfloor instead of being nailed or glued down. The planks lock together at the edges, so the layer underneath does a lot of work.

Check for an Attached Pad First

Many laminate planks come with a pad already attached to the back. If yours has one, you may not need a separate underlayment. You may still need a vapor barrier over concrete. Be sure to read the box and the manufacturer instructions before you buy anything extra.

Get Thickness Right

Most laminate performs best over a thin, firm underlayment, usually somewhere between 1 mm and 3 mm. Those locking joints need steady support, and too much squish lets them flex, gap, or even break over time. Before you buy, check your flooring’s instructions to confirm the exact thickness it calls for.

Laminate Over Concrete

Concrete can pass moisture up into your floor, even when it feels dry. Laminate over concrete needs a vapor barrier, either a separate 6-mil polyethylene sheet or an underlayment with one built in.

 

Choose Hardwood Underlayment That Fits the Install

Before you pick an underlayment for hardwood, you should know how you’re installing it. Nail-down and floating floors each need something different underneath.

Nail-Down and Glue-Down Jobs

For nail-down installation over a wood subfloor, many installers use felt paper or rosin paper. These layers help cut squeaks and add a thin buffer. For glue-down installation, the adhesive often does the job of bonding the floor, and some products include their own moisture control. Many glue-down jobs use no separate pad at all.

Floating Engineered Hardwood

Engineered hardwood can be floated like laminate. In that case, a foam, felt, or cork pad is common. Solid hardwood is usually nailed or glued, not floated.

 

Set Up Vinyl Plank for a Clean Install

Luxury vinyl plank is popular for good reason. It's tough, good-looking, and easy to live with.

Does Vinyl Plank Need Separate Underlayment?

Many click-lock planks and rigid-core products already have a pad attached. If yours does, skip the extra layer. If the plank has no pad, check the instructions. Some makers allow a thin underlayment, while others do not.

Thickness Limits for Vinyl Plank

Vinyl plank needs firm support to stay locked tight. Too much cushion puts stress on the click-lock joints, which can lead to gaps or peaking down the road. Stick with a thin, dense underlayment that falls within the thickness your flooring’s maker approves.

 

Get Carpet Padding Right

Carpet padding is made just for carpet. It adds a soft, cushioned feel underfoot and helps your carpet hold up longer against everyday traffic.

Padding Types

The main types of carpet padding are foam, rebond, and memory foam. Rebond is made from recycled foam bits bonded together and is common in homes, while memory foam pads add extra softness for bedrooms and lounges.

Density and Thickness

Carpet density matters. A denser pad holds up better in high-traffic areas like hallways and stairs. For most homes, a pad around 3/8 inch to 1/2 inch thick fits well.

Looped carpet like Berber and loop pile styles do best with a firmer, thinner pad, while a 10-pound pad is firmer and denser than an 8-pound pad, so it suits busier rooms. Check your carpet maker's guidance for the exact match.

Carpet Over Concrete?

Yes, carpet can go over concrete, you'll just need the right pad and a plan for moisture. Start by testing your slab for moisture, then choose a carpet pad with a built-in moisture barrier to help protect your carpet from below.

 

Beat Moisture Before It Beats Your Floor

Moisture is the top floor wrecker out there, so be sure to stop it before it starts. A little prep up front keeps your new floor looking great for the long haul.

Vapor Barrier and 6-Mil Polyethylene

A vapor barrier blocks moisture from rising through the subfloor. A common choice is 6-mil polyethylene sheeting, laid out with overlapped seams. You may also see the term vapor retarder, which slows moisture instead of stopping it. Concrete slabs, basements, and ground-level rooms call for this step.

Test Before You Lay

Test concrete and wood subfloors for moisture before any install, using the method your flooring’s maker recommends. If your readings come back too high, fix the problem first, then get to work on your new floor.

 

Follow a Simple Decision Path

As you get started on your project, work through these steps in order:

  1. Start with your flooring. Laminate, hardwood, vinyl plank, and carpet each need something different underneath. Check whether your flooring already has an attached pad. Browse our full underlayment lineup.
  2. Check your subfloor. Concrete needs a plan for moisture, while wood needs a flat, solid surface. See our options for concrete subfloors.
  3. Read the room. A basement, a bedroom, and a busy hallway all ask for different things, so think about moisture, sound, and foot traffic. Look at our acoustic underlayment for quiet rooms.
  4. Choose your material. Foam, felt, cork, rubber, and combination underlayments each work best in certain spaces. Shop combination underlayment for a two-in-one option.
  5. Confirm with the instructions. Your flooring maker’s guide has the final say on thickness and type, so give it one last look before you buy.

 

Dodge the Mistakes That Void Warranties

Small slips cause big headaches. Watch for these:

 

Install It Step by Step

Here's a simple flow for most floating floors.

  1. Prep. Clear the room and remove old flooring or old pad.
  2. Clean. Sweep and vacuum the subfloor. Fix bumps and loose spots.
  3. Test. Check moisture on concrete and wood.
  4. Roll out. Lay the underlayment across the room. Keep seams tight, not overlapped, unless the product says otherwise.
  5. Seam. Tape the seams with the right tape. Shop seam tape and install tools.
  6. Check. Look for wrinkles, gaps, and gaps at the walls before the first plank goes down.

 

Lock In Your Pick and Get Moving

Choosing underlayment is easier than it looks, and it all comes down to three things: your flooring, your subfloor, and your room. Get those right, and you’ll have a floor that feels solid underfoot for years to come. If you’re still on the fence, don’t hesitate to reach out to our team. We’ll help you find the right layer so you can roll into your project with confidence. Contact us today and lock in the perfect fit for your floor.

Contact Us Today